ReliaDrain

Innovative, Cost-Effective, Efficient.
Introducing the ReliaDrain electronic level controlled on-demand condensate drain. Th ideal solution for draining condensate from your compressed air system with zero air loss.



Why Zero air loss is important?
A typical TA2000 compressor with a third stage 1/2-inch timer-operated drain valve, operating at 125 psig opening every eight minutes for twenty two seconds, will vent over 3.9 million cubic feet of compressed air per year after draining condensate. At $0.05/kWh, that is nearly $1,440 wasted annually from one single drain valve.

Empty state:
Condensate enters the inlet opening (1) and collects in the pressurized container (2). The diaphragm valve is closed by the pressure of the pilot supply line (3) and the solenoid valve (4) which ensures a tight and leakproof seal of the main valve diaphragm (5).

Filled state:
When the container (2) has filled with condensate and the capacitive level sensor (6) signals at the maximum level. The solenoid valve is energized and the area above the valve diaphragm is vented. The valve diaphragm opens (7), forcing the condensate into the discharge pipe (8).

Recommended Upgrade For Non-Lubricated Air Systems : Any condensate drain point using a timed solenoid or pneumatically operated valve. Perfect for any type compressor, receiver, dryer, header, or lowpoint of an oil free compressed air system.

For more information, please visit our website at:
www.c-a-m.com/cs

Follow us on Twitter at:
http://twitter.com/CameronCS

Join our group on LinkedIn at:
http://www.linkedin.com/groups?gid=2368342&trk=hb side g

Join us on Facebook at:
http://www.facebook.com/home.php#/pages/Camerons-Compression-Systems-Group/159270207592

Check us out on YouTube at:
http://www.youtube.com/user/CameronCSGroup

Cameron's Compression Systems Group on Wikipedia:
http://en.wikipedia.org/wiki/Compression_Systems

Check out our Google Homepage at:
http://www.google.com/profiles/CameronCSGroup